变刚度层叠梁的力学性能研究

为满足不同场景下的功能需求，变刚度结构得到越来越广泛的应用．以机器人手臂为例，在执行操作时，需要其手臂的结构刚度足够大，避免出现过大的扭曲和变形，而在与人交互时，又需要其结构足够柔软，以保证在此过程中与人交互的安全性．该类变刚度结构可根据需求通过外部激励在柔性和刚性状态之间自由切换．在该文章中，研究分析了层叠梁结构，通过理论推导和数值模拟，对其力学性能做出了很好的预测，同时为此类结构的研究提供了有效可靠的思路和方法．     

柱面微通道板的制备及其性能研究

针对未来空间天文学应用的超分辨率光谱成像仪器的需求，对低噪声柱面微通道板（MCP）的制备方法及其性能进行了研究. 提出了一种将光学抛光与热成型相结合的新的柱面MCP制备方法，利用不含放射性元素的低噪声MCP玻璃，制备出曲率半径为400mm、尺寸为30mm′46mm、长径比为80:1、通道直径12.5mm、通道间距15mm的柱面MCP，并将其与感应电荷楔条形阳极（WSA）组成光子计数探测器，对其暗计数率、分辨率进行了检测，暗计数率约为0.1counts/cm2×s.     

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Pitch has been used to prepare electrodes by high-temperature heat treatments for supercapacitors, lithium-ion batteries, on account of its rich aromatic ring structure. Here, the toluene-soluble component of pitch is used to prepare a kind of laminated carbon. This was realized by a template-free synthesis at low temperature with the addition of pressure. The toluene-soluble component has a small molecular weight, which makes the thermal deformation ability stronger and then enhances the orientation of the carbon layer with the help of pressure. The prepared anode exhibits a splendid electrochemical performance compared with the traditional graphite anode. A high stable capacity of approximately 550 mAh g⁻¹ at 50 mA g⁻¹, which is much higher than graphite (372 mAh g⁻¹), is obtained. Also, when the current density is up to 2 A g⁻¹, the capacity is about 150 mAh g⁻¹. Surprisingly, it also delivers a superior cycling performance. And when used as the anode/cathode electrode for lithium-ion capacitors, a high energy density can be obtained. The present work offers an opportunity to utilize the pitch source in lithium energy storage with promising cycle life, high energy/power density, and low cost.     

Effect of magnesium and titanium on the cathodic behaviour of aluminium in nitric acid

Cathodic polarization of aluminium and Al–0.18 wt.% Mg and Al–0.08 wt.% Ti alloys in 0.24 mol dm^?3 nitric acid solution at 38 °C has been employed to assist understanding of the roles of alloying elements in electrograining. The findings indicate that additions of magnesium and titanium to aluminium accelerate the corrosion of the substrate under the alkalization caused by the cathodic reactions. The accelerated dissolution and the consequent formation of hydrated alumina result in a decreased net cathodic current density in potentiostatic and potentiodynamic polarization conditions relative to the behaviour of aluminium. Copyright © 2014 John Wiley & Sons, Ltd.     

局部载荷作用简支板屈曲分析

根据能量原理,引入大挠度Von-Karman方程,求解了应力不连续简支板的屈曲问题,得到了临界载荷和临界应力计算系数.     

正交复合材料面层夹层板非线性理论及应用

针对复合材料面层夹层板的构造和变形特点，考虑横向剪应力在面层和芯层粘结处的连续条件，应用Ｈａｍｉｌｔｏｎ原理建立了基于五个未知函数的正交铺设复合材料面层夹层板的非线性精化理论。对静力学问题，控制方程化简为由四个基本未知函数表述。文中还分析了简支正交铺设复合材料面层夹层板的非线性弯曲，给出了载荷—挠度特征关系和板中应力的分布状况。数值计算表明，夹层板面层和芯层粘结处的层间剪应力在工程设计中是十分重要的。     

用三维弹性力学方法研究圆板的稳定问题

用三维弹性力学方法研究任意边界条件圆板的轴对称稳定问题，利用Ｈ变换和Ｓｔｏｃｋｅｓ变换，导出位移函数及其偏导数的一种新型双重极数式，并由数学弹性定理论的基本方程和边界条件建立的特征方程，求得最小临界载荷的精确解，文末以简支圆板为例进行数字计算，结果表明：在弹性失稳范围内，三维弹性力学方法求得的临界载荷略低于经典理论的结果，对于薄板的弹性稳定问题，经典板理论有足够的精度。     

具有自由边的复合材料层合板的解析解

从三维弹性力学基本方程出发,通过假设自由边的边界位移函数,建立了正交异性层合板的状态方程,给出了对边自由,对边简支矩形板的解析解.此解满足层合板的基本方程和层间连续条件.用本文的方法比较容易处理层合板的自由边.算例表明,数值结果具有较高的精度.     

非均匀圆柱型正交各向异性圆板的弯曲

研究了非均匀圆柱型正交各向异性圆板在均布横向载荷作用下的弯曲问题，求得了折算刚度随半径按指数规律变化的非均匀圆柱型正交各向异性圆板弯曲问题的渐近解，给出了周边固支和简支条件下的渐近解．通过算例可以看出，这种非均匀性对圆板中心挠度的影响是显著的     

Characterization of short duration stress pulses generated by impacting laminated carbon-fiber/epoxy composites with magnetic flyer plates

Short duration stress pulses are of particular interest in determining the interfacial crack tip instability criteria for the dynamic fracture behavior of laminated carbon-fiber/epoxy composites. However, the heterogeneous architectures of laminated composites can alter the characteristics of a stress pulse as it propagates toward a crack tip. This makes it difficult to use standard dynamic testing techniques for characterizing these materials, since these techniques assume the characteristics of the stress pulse do not change as a result of propagation and can therefore be unambiguously determined from impact conditions. This paper presents a novel experimental technique that has been developed for characterizing short duration stress pulse propagation in laminated composite materials. In this technique, a dynamic moiré interferometer is used to capture fringe patterns corresponding to displacement fields associated with short duration stress pulses that were generated by impacting 0° and 90°/0°/90° carbon-fiber/epoxy composites with a magnetic flyer plate. Appropriate dynamic testing conditions for capturing high fidelity fringe patterns were determined using the recently developed dynamic moiré fringe contrast factor. The effects of the composite architecture on the propagation of short duration stress pulses observed with the dynamic moiré interferometer were confirmed by transient dynamic finite element analysis. From comparisons of experimental and numerical data, it was determined that the impact conditions for the magnetic flyer plate and laminated composite will not necessarily be planar, which has a significant effect on the intensity and duration of the propagating stress pulse.